Wookiee Masks

The mask is the most important part of the costume, and also the most difficult.

General Information

Anatomy & Structure

1. Chewie's teeth are human except for his upper and lower canines, which are sharp, animal-like fangs.
2. There is a large gap between his upper front teeth and his upper canines, probably to create room for the lower canines when the mouth closes.
3. The pattern of Chewie's hair radiates from his eyes. He has a mustache-like feature as well.
4. There are two holes in the back of his mouth.
5. There is a vertical line in his nose and it runs down to his upper lip.
6. Chewie's eyes are blue.
7. According to an interview with Stuart Freeborn in Star Wars Insider Issue #70 (pages 40 through 44), the Chewie mask added about 4” (10.16 centimeters) to Peter’s height. Chewie has a large forehead for this reason.
8. Peter Mayhew has stated that he had perfect visibility in the masks.

Lineage

Stuart Freeborn and 2001: A Space Odyssey

1. The original Chewie mask was based on the principles that Stuart Freeborn and his team pioneered for the ape costumes in 2001: A Space Odyssey. That is, they are mechanical masks, not prosthetic appliances.
2. Chewbacca was an original creation; while the same techniques that brought 2001's apes to life were used in Chewie's construction, he was not cobbled together from left over materials.

John Chambers and Planet of the Apes

1. There is an urban legend that Chewbacca was based on the ape make-up from the Planet of the Apes franchise, either using the same techniques or even using leftovers from the recently cancelled TV series. This is completely untrue.
2. The Planet of the Apes make-up appliances were not mechanical and were constructed by John Chambers and his team at the same time Stuart Freeborn and his team were building the animatronic apes for 2001.

Skin

1. For the original trilogy, the skins were foam latex. Nick Maley ran Stuart Freeborn's foam lab on Star Wars and Empire and ran all of the Wookiee skins. Foam latex is not the same thing as standard mask making latex, also known as RD-407 latex that is commonly used in Halloween masks.
2. The photos of the unfinished Chewbacca skins (from the collection of Star Wars producer Gary Kurtz) show that the skins did not cover the entire head, but stopped in the middle of the forehead ad in front of the ears.
3. The skins in Revenge of the Sith were soft, prosthetic grade silicone and covered the entire under skull.
4. For The Force Awakens and all subsequent films, the creature team acquired the original Chewbacca mask mold from Stuart Freeborn, 3D scanned it, and produced their masks based on that.

Underskull & Mechanics

Original Trilogy

1. According to an interview with Stuart Freeborn in Star Wars Insider Issue #70 (pages 40 through 44), the original mask had a polyurethane mechanical under skull. When Peter Mayhew opened his mouth, his jaw would force the mechanical jaws open.
2. The movement of the mechanical mouth pulled the lips back to reveal the teeth whenever the mouth was opened. In one of the photos of the under skull, you can see a channel cut into the skull that goes from the lip down to the lower jaw in order to facilitate a cable to control the lip motion.
3. Peter Mayhew states that the lip snarl was caused by magnets that repelled each other.
4. I spoke to Peter Mayhew at DragonCon 2007, and he claimed that the tongue had a small metal rod cast into it that allowed him to make the tongue wiggle. You can see the tongue move slightly at the end of The Empire Strikes Back when he is in the cockpit of the Falcon with Lando.
5. According to Nick Maley's website, both the 2001 apes and Chewbacca used a fiberglass underskull that was filled with rigid polyurethane foam.
6. According to Nick Maley, Chewbacca had a double hinge system that allowed the jaw to not only open and close but pivot left and right.

Revenge of the Sith

1. At DragonCon 2007, Peter Mayhew told me that the Revenge of the Sith mask was very heavy due to the animatronics. However, the puppeteer did not use the animatronics much and instead relied on Peter's own movements.

Hair

1. Darren Blum spoke with Lou Elsey at Celebration III, and she explained that most of the hair on the Episode 3 masks had been glued on using a product called Prosaide. The inner areas of the face had the hair punched in.
2. The Elsey's also explained that they punched in several hairs going cross-wise to help tame the hair and keep it down against the mask. Darren guessed that they would have punched in a single long hair running ear to ear over the top of the head with it being punched in every inch and a half or so. This hair would be concealed by hair from the face and would give something for the top most layer of hair to bond to using hairspray.
3. Allure: Star Wars: Chewbacca's Hair Routine in The Force Awakens Is Actually Pretty Glam

Materials & Construction Techniques

Scratch-Building a Mask

• Chewbacca mask build: Overview by Christopher Thomas
• Tested: The Making of Adam Savage's Chewbacca Mask!
• Moonwatcher part one Or How to build a chewbacca mask
• Moonwatcher part two Or How to build a chewbacca mask
• Moonwatcher part Three Or How to build a chewbacca mask
• Moonwatcher part four Or How to build a chewbacca mask
• How to build a chewbacca mask continued Part 5 Adam's Moonwatcher
• How to build a chewbacca mask continued Part 6 Adam's Moonwatcher
• Chewbacca Mask - Build your Own - Part TWO - chefhawk Ultra HD 2017
• Chewbacca Mask - Make your Own Studio scale version - tutorial - chefhawk HD - 2017
• Chewbacca Mask - Make your Own Studio Scale Version - Part TWO - chefhawk HD - 2017

Lifecasting

• Bob Kohn’s Life-Casting Tutorial
• Amount of BodyDouble Silicone needed
• How to Life Cast: Head, Hands, Teeth

Sculpting

• Sculpting detail in oil clay tutorial
• Sculpting Neck Detail
• Sculpture Techniques - Textures and Forms

Mold-Making

• How to Make a Mold - Finding the Correct Case Line - Mini-Tutorial

Casting the Skin

• Bob Kohn’s Mask Making with DragonSkin & Slacker Tutorial
• The How and Why of Silicone: Part 1
• The How and Why of Silicone: Part 2
• The How and Why of Silicone: Part 3

Jaw & Lip Mechanics

• Chewbacca Mask - The Basics of attaching the Lip Mechanism to the Lip
• Wookiee Lip Lift Mechanism

Mouth & Teeth

• Advanced Creature Teeth: Prosthetic Dental Appliances - Part 1
• Advanced Creature Teeth: Prosthetic Dental Appliances - Part 2
• How to Make Fake Teeth
• Acrylic Dental Teeth

Painting

• Fuse FX Tutorials
• How to Paint Realistic Silicone Skin - Silicone Painting Techniques
• Silicone Painting Skin - Realistic Flesh Tones
• Colour Theory in Practice
• The How and Why of Silicone: Part 5
• Chewbacca mask build: Painting by Christopher Thomas
• Chewbacca Lip Repaint TUTORIAL -To Improve The Look - chefhawk - 2018 HD
• Chewbacca - Eye TUTORIAL - To Improve The Look - chefhawk - 2018 HD

FuseFX and Psycho Paints work. You can’t use other pants (even latex mask paints) because they will flake off.

Hair Work

• Julie’s Hair Punching Tutorial
• Make Up FX Hair Punching Video
• Evan Campbell’s Hair Punching Tutorial
• Dan Kurz' Hair Punching Tutorial
• How to Punch Hair - Hairwork for Silicone Characters - Part 1
• How to Punch Hair - Hairwork for Silicone Characters - Part 2
• Tarfful Wookiee building Hair Punching
• Chewbacca mask build: Hair work by Christopher Thomas
• Hairing Chewbacca Mask (Part 1 of 4)
• Hairing Chewbacca Mask (Part 2 of 4)
• Hairing Chewbacca Mask (Part 3 of 4)
• Hairing Chewbacca Mask (Part 4 of 4)
• Making a Wookiee Dreadlock

Hair Grooming & Styling

• Chewbacca hair thinning tutorial Enhanced

• Duck’s instructions for styling the hair

Maintenance

• Bob Kohn’s “How to Wash Your Wookiee” tutorial

Fan-Made Kits

• ShapeWays: Wookiee Bead